What are the tips and precautions for the tooth rubbing machine?

Tinder operation skills

Teeth rubbing machineIt is a necessary screw machine for screw manufacturers. It has the advantages of simple operation and high production efficiency. It is a relatively advanced and general thread forming machine today. However, the scale range of the teething machine produced by screw machine equipment manufacturers on the market can be formed is generally 1-12 mm and the length is about 5-150 mm. Therefore, the equipment bought by many screw factories cannot form some parts with larger thread specifications, and it is difficult to find a suitable large-scale equipment manufacturer. What are the operating specifications, operating techniques and precautions of the teething machine?

Operating specifications of teeth rubbing machines

1. The loading, unloading and installation of the wire rub machine must be carried out according to the instructions to prevent safety accidents.

2. Manufacturers should select qualified personnel who have received training in machinery business to operate and maintain the machines.

3. After entering the factory, practitioners must implement safety education for operators in accordance with local safety regulations.

4. Manufacturers should effectively warn operational attention when dealing with unsafe operation.

5. The brightness of lighting equipment in the machine working environment is based on relevant local regulations.

6. Neither electrically conductive CO2 or ABC dry powder fire extinguishing equipment should be equipped near the machine.

7. You should read the operating instructions of this machine before operating the machine.

8. For those with older hair, they should use a hairband to tie their hair or wear a hard hat before operating it, or repairing the machine.

9. Keep the machine and nearby tidy, avoid too much oil stains on the ground and slippery, and remove obstacles around the machine that will affect operation.

10. When operating the machine, the electrical box cover and motor protective cover must be fastened, and the electrical wiring should be operated in accordance with the instructions and safely grounded.

11. Before repairing the machine, the power supply should be cut off first and only suitable tools can be used.

12. Those who wear loose clothes, unqualified clothes with too long sleeves, wear tie, slippers, and gloves are not allowed to operate or repair the machine.

13. When the machine is running and working, it cannot rely on the machine.

14. When adjusting the machine, you must use a manual flywheel or switch to make the machine rotate several times in an inch-moving manner to check whether there are any abnormalities in the machine, and the ring can be opened and connected first to avoid accidents.

15. When an abnormality is found during operation, the machine should be shut down immediately to find out the cause and eliminate it in time.

16. Observe the oil circuit to be unobstructed at any time, refuel in time, and clean regularly.

17. Manufacturers shall not increase the diameter of the motor pulley without authorization in order to increase production capacity.

Precautions for operating the tooth rubbing machine

The precautions for operating the tooth rubbing machine are nothing more than surface maintenance and internal parts maintenance. On the surface, the surface of the tooth rubbing machine is a shell, which represents the overall image and protects the tooth rubbing machine. Therefore, it is necessary to reduce surface damage, scratches and keep it clean, especially iron filings, water stains, and dirt. Do not use sharp objects to scratch the metal shell on the surface. The parts on the tooth rubbing machine should be regularly lubricated oil to avoid contact with acid and alkali substances, and avoid corrosion and other phenomena, causing metal rust. The tooth rubbing machine is an important 5-gold accessories processing equipment. The equipment is expensive and it is necessary to maintain it well.