Briefly introduce the characteristics of double-head high-speed teeth rubbing machine

Vertical double-head automatic tooth rubbing machine - This machine is a flat plateHigh-speed teeth rubbing machine.This is a special equipment widely used in the production of headless poles and bolts. Its main structure consists of the fuselage, fixed block, movable block and connecting rod mechanism, feeding mechanism, rotating components, etc.

The double-headed re-wire machine simultaneously realizes a double-headed tooth rub. Once the double-headed tooth rub is remanufactured, the time-consuming and labor-saving efficiency of repeated winding is low, and the double-headed threads are twisted at the same time. This saves time and manpower, and has high efficiency and low waste.

Re silk machine safety usage specifications:
1. Before starting production, you should first thoroughly check each part to see if the 2 sides of the reel are balanced. After the test is finished, you can start normal production.
2. The equipment of all equipment above the machine tool should be intact and must not be disassembled.
3. During the operation of the reel, it is impossible to operate manually with running components and reel plates.
4. When the work is stopped due to sudden power outage or other reasons, the remaining gaps between the rolled plates should be eliminated in accordance with relevant regulations and shall not be used forcibly.
5. Before the wire rolling machine stops working, the blank should be stopped first, and then power is turned off until there is no blank between the wire rolling plates.
It is necessary to better maintain the surface of the automatic re-wire machine accessories, that is, it is often not allowed to cause water stains on the accessories during work. If it is wrong, wipe it clean when the machine stops use and continue to pay attention to cleaning the surface of the accessories.

High-speed teeth rubbing machineMachine structure adjustment:

(1) Some adjustments to the transmission: The pulleys of the automatic rewire machine are divided into fast and slow speed. When making adjustments, you only need to use a handwheel to replace the screws of the bevel gear to make the screws loose or tightened. To adjust the direction of the slider or the length of the connecting rod, please loosen the two fastening nuts of the adjustment screw sleeve and adjust the length of the connecting rod.
(2) Adjustment of feeding arrangement of automatic re-wire machine: When feeding, part of the material is a hopper. Under normal working conditions, the hopper does not need to be adjusted. The billet rotates under the roulette to make the billet lay neatly and slide down through gravity. When you need to change the specifications, just make adjustments as needed.
(3) Equipment and adjustment of wire sweeping board: If the automatic wire rework machine works for a long time, it will damage the guide surface of the machine, causing the two thread plates to be uneven and cause scrapping. In this case, there are two ways to deal with it. First, you can use a metal piece to scratch it. However, it is not always a horn piece, and it is inconvenient to adjust it. Only scratching can solve the problem.
There are many models for the Songfeng series silk screen printer models. The above photos are only 2 of them. If you need to know the contact with the manufacturer, you can customize the model that suits the customer's products.
High-speed teeth rubbing machineEquipment maintenance precautions:
The most professional re-wire machine that wants to produce qualified screws is divided into: automatic, semi-automatic, flat, high-speed, etc. Using re-wire machine to produce screws not only saves time and energy, but also does not easily crack. At present, the basic purpose of the mechanical industry is mainly to use wire rubbing machines.
Songfeng Machinery Co., Ltd. is a professional manufacturer of re-wire machines - fully automatic high-speed re-wire machines, double-head automatic re-wire machines, fully automatic re-wire machines, semi-automatic re-wire machines, manual re-wire machines, fully automatic double-wire machines, straightening and cutting series re-wire machines and other types of re-wire machines. It can also be customized according to customer requirements. It is used in a series of standard parts, such as 6-corner bolts, expansion bolts, T-shaped wires and double-head wires.