High-speed teething machine manufacturers tell you how to implement the lubrication function of the wire rolling machine?

High-speed teeth rubbing machineThe manufacturer tells you that when the winder is running, sometimes poor lubrication will occur, which not only delays the progress of the work, but also causes great damage to the machine. If you turn on the machine regularly to see if it is lubrication well, it is really a delay.

The new automatic wire rub machine can improve work efficiency and can also be automatically lubricated. It saves manual lubrication time during the original working time and greatly improves work efficiency.

When the lubricant is working, lubricating oil and compressed air are mixed and sprayed at the nozzle to form a spray, which is evenly attached to the tooth surface of the gear to form an oil film, so that the gears maintain a good lubricating state. At the same time, the sensor at each lubrication point feedbacks the lubricating state. For the main control system, the main control system processes the feedback information and reminds the fault information.

When the lubricant is working, the compressed air is divided into two channels by the filter, the total air valve and the three links: one way through the oil pump air valve, and the pressure reducing valve enters the oil pump as power; another way is to directly reach the nozzle plate through the pipe, and the nozzle plate is installed with a certain number of nozzles according to the width of the tooth surface for lubrication. The oil pump uses compressed air to pump the oil out of the oil tank, and the power reaches the nozzle plate through the safety valve.

High-speed teeth rubbing machineManufacturer wire rubbing machines are suitable for all machinery manufacturing industries, machine tools, mold machinery, plastic machinery, printing machinery, packaging machinery manufacturing plants, engineering machinery, automotive parts, aviation engines, rolling stocks, tobacco machinery and general machinery industries.