What are the precautions for using the screw tooth rubbing machine straightening and cutting machine

useScrew tooth rubbing machine straightening and cutting machineWhen you are in the process of taking the following precautions:

1. Before operation, you should read the operating instructions of this machine and operate according to the instructions to prevent safety accidents.

2. Operators must undergo mechanical business training and have corresponding operating skills and safety knowledge.

3. Operators should receive safety education in accordance with local safety regulations, understand and abide by relevant regulations.

4. The working environment of the machine should be kept clean to avoid excessive oil stains on the ground and slippery, and to remove obstacles around the machine that will affect operation.

5. When operating the machine, the electrical box cover and motor protective cover must be fastened, and the electrical wiring should be operated in accordance with the instructions and safely grounded.

6. Before repairing the machine, the power supply should be cut off first and only suitable tools can be used.

7. Operators should wear loose, appropriate clothes, overly long sleeves or tie, slippers, and gloves, who are not allowed to operate or repair the machine.

8. When the machine is running and working, it cannot rely on the machine.

9. When adjusting the machine, you must use a manual flywheel or switch to make the machine rotate several times in an inch-moving manner to check whether there are any abnormalities in the machine.

10. When an abnormality is found during operation, the machine should be shut down immediately to find out the cause and eliminate it in time.

11. Observe the oil circuit to be unobstructed at any time, refuel in time, and clean regularly.

12. Do not change the machine's setting parameters at will.

13. Pay attention to safety during operation to avoid injury.

14. When performing maintenance, be sure to cut off the power supply to avoid accidents.

The above precautions are for reference only. The specific precautions during use may vary depending on the machine model and operating environment. It is recommended to read the instructions carefully before actual operation and follow the instructions and relevant regulations.