Precautions for using double-head screw fully automated stamping and rubbing machine

Double-head screw fully automatic stamping and tooth rubbing machineThe precautions are as follows:

1. Before driving, you should carefully check whether all parts are normal, and whether the wire rubbing plate is balanced. Only after trial rubbing is normal can the production be carried out.

2. All protective devices on the tooth rubbing machine should be intact and should not be disassembled at will.

3. Do not contact the workpieces and wire rubbing boards during operation with your hands.

4. Before stopping the wire rubbing, the blank supply should be stopped first. Only when there is no blank between the wire rubbing boards can the power supply be cut off.

5. If the machine is shut down due to temporary power outage or other faults, and there is a blank in the wire rubbing board, it should be eliminated according to the prescribed method and the machine must not be forced to start.