High-speed teething machine manufacturer teaches you why the wire rubs have poor lubrication

High-speed teething machine manufacturerThe wire rubbing machine avoids limitations and can work on all machines, but the wire rubbing machine is poorly lubricated when working. This will seriously affect the working efficiency and damage the machine at the same time; whether the machine is normal is a waste of time for lubrication. We all hope to have an automatic lubrication wire rubbing machine. As a professional re-wire machine factory, the wire rubbing machine is self-lubricated, saving time for manual lubrication and greatly improving work efficiency.

High-speed teething machine manufacturerLet me tell you that when the wire rub machine is working, the air is compressed through the filter and the total air valve. When the oil pump valve and pressure reducing valve enter the oil pump, it becomes power; the other directly reaches the nozzle plate, and the nozzle head is installed according to the width of the lubricating tooth surface. The oil pump uses the principle of air compression to supply oil, and directly pumps the oil to the nozzle plate.

During the processing of the wire rub machine, a mixture of sprayed lubricating oil and compressed air is formed. A uniform oil film is formed on the surface of the gear, so that the gear has a good lubricating state. At this time, each lubrication point sensor will react the lubricating state to the main control system. If the feedback information fails, the main control system will issue an alarm. After the lubrication work is stopped, the main control system will stop working and start the lubrication interval. When the first lubrication interval is completed, the lubrication system will automatically start the second lubrication process and perform cyclic lubrication.