Teeth rubbing machine

Teeth rubbing machineIt is a equipment for processing the outer surface of cylindrical workpieces. It is widely used in the 5-metal industry and is mostly used for the manufacturing of screws. Screws are the most basic parts of the industry and are also the most commonly used parts. For automobiles, motorcycles, and machinery, you can see screws everywhere in our lives. Of course, there are machinery for producing screws, tooth rubbing machines, and a kind of machine for processing screws.

Teeth rubbing machineIt is a processing equipment for the outer surface of a cylindrical workpiece. The working principle of wire rubbing is that the wire rubbing surface has the same tooth shape as the bolt thread. When the wire rubbing plates move each other, the threads are rubbed out the threads. The thread rubbing plate is completed with one bolt thread at a time, and the speed is quite high. Wire rubbing is mostly used for small bolt processing.

Advantages of Heling tooth rubbing machine:

●Use 90 degrees of feeding, with accurate force points to ensure that one nail is sent at a time.

●The nail bridge is made of 40Cr high-frequency quenching and straightening, with smooth lower nails and wear-resistant.

●The slider is made of tin-blue alloy copper, and the side plates are made of high wear-resistant spring steel, which has strong wear resistance, low resistance and no heat generation.

●The bearing adopts IKO brand. The lubrication system is imported from Taiwan.

●The contact surface is scraped with traditional manual technology, and the gap between each part is less than 0.02 MM