Heling Machinery briefly talks about how to adjust and operate high-speed teeth rubbing machine

Any machine will inevitably wear and tear some parts during the production process, or there will be deviations after running for a long time, so the machine needs to be adjusted before production. Therefore, Foshan Heling Machinery Equipment Co., Ltd. will better serve customers.High-speed teeth rubbing machineThe following adjustments have been made:

1. If the feeding time is adjusted in advance and delayed, the cam can be adjusted forward and backward. During the track adjustment process, the material should be ensured to pass smoothly. Fully automatic wire rubbing machine manufacturer.

2. Place the screw material before pushing the material, press the inch movement to let the screw material turn half a circle, and use the screw material to check whether the tooth marks are aligned. If it is not adjusted, do not use the connecting rod to make large adjustments, and then lock them to prevent accidents.

3. When using newly ground tooth plates, a gasket should be added to compensate for the wear thickness. (During the formal wire rub, reduce the bottom rolling pressure as much as possible, and adjust the gap between the teeth rubs to just the right time to improve the service life of the machine.)

4. Adjust the wire tooth plate, pay attention to the installation position of the long and short plates and whether they are parallel to the height. Turn the flywheel by hand to see if the feeding time is correct. Note: When the power is turned off, if the length and short teeth are different in height, use a gasket to raise it. This should be especially true for high-speed wire rubbing machines.

The adjustment of the machine is to ensure and improve production accuracy, so the adjustment accuracy of some parts needs to be strictly required. In this way, the product's pass rate will be higher and it can effectively ensure the input-output ratio. You are trustworthy in Heling Machinery High-speed Tortoist!

Foshan Heling Machinery Equipment Co., Ltd. (hereinafter referred to as Heling Company) is a comprehensive industrial company integrating new product research and development, manufacturing and sales. It mainly engages in automatic cutting and scrubbing machines, high-speed scrubbing machines, screw scrubbing machines straightening and cutting machines, non-standard scrubbing machines, non-standard scrubbing equipment, double-head screw fully automatic stamping and scrubbing machines, straightening and cutting machines, Guangdong scrubbing machines, Guangdong scrubbing machines, Foshan screw scrubbing machines, Shenzhen automated scrubbing machines, Dongguan straightening and cutting machines, Guangdong scrubbing machines, etc. Faced with the rapid development of technology, our company is constantly innovating and bravely developing, and has won the market with high-quality products, extensive marketing network, and excellent after-sales service. The company's purpose is to innovate, survive with quality, integrity-based, and considerate. We sincerely welcome new and old customers from all over the country and around the world to visit, jointly develop and create brilliance together!