What are the precautions during the application and use of Heling Machinery?

Teeth rubbing machineIt is mainly used for screws and fasteners to rub wires. The products processed by the rubbing machine are used in all walks of life, such as machinery, 5 gold, electronics, furniture and public facilities. The maintenance of the rubbing machine is very important. If timely maintenance can be achieved, the production process will be smoother and the production efficiency will be greatly improved. On the contrary, if the guide rail surface of the guide clock machine is worn for a long time and is not spared, it will easily produce bad products and affect the production efficiency. So, what are the precautions for the use of the rubbing machine?

Before turning on the tooth rubbing machine, the operator should try to rub and check each component and wire rubbing board to confirm that it is running normally before the next operation can be carried out; check whether the machine guide rail surface is flat, and if there is any wear, it is necessary to scrape off the impurities on the guide rail surface. The lubricant oil maintenance of the wire brushing machine is very important and needs to be replaced regularly. The filter and screening program should also be cleaned frequently. When operating the tooth rubbing machine, the staff should always pay attention to their own safety and are not allowed to contact with their hands during the start-up process; when it is necessary to shut down, the supply of materials is stopped first, and the power can be cut off when there is no material between the wire rubbing board. Without special circumstances, the machine must not be forced to turn on and off to avoid unnecessary damage to the soft and hard body of the tooth rubbing machine.

The tooth rub is also one of the core equipment of the screw manufacturing enterprise. If a fault occurs, it will inevitably have adverse effects on the production. Therefore, the maintenance of the tooth rub is also very critical.
Foshan Heling Machinery Equipment Co., Ltd. is a comprehensive industrial company integrating new product research and development, manufacturing and sales. It mainly engages in Guangdong tooth rollers and automatic cutting, high-speed, double-head screw fully automatic stamping, straightening and cutting, non-standard tooth rubbing equipment. Faced with the 211th century of rapid development of technology, our company has been constantly innovating and bravely developing, and has won the market with high-quality products, extensive marketing network and excellent after-sales service.