Heling Machinery will take you to learn about the tooth roller

Tooth RollerIn fact, there is a common name. It is also known as the wire rolling machine. The wire rolling machine is a multi-functional cold rolling forming machine tool. The wire rolling machine can roll thread, straight and twill mark on the workpiece under the cold state within its rolling pressure range; rolling of straight, helical teeth and oblique spline gears; straightening, shrinking diameter, rolling and various forming rolling.

The tooth rolling machine can be divided into: 2-axis eccentric type, 2-axis rolling type, 2-axis hydraulic type, 2-axis hydraulic rolling type, 3-axis cam type, 3-axis hydraulic type, 3-axis hydraulic type, and 3-axis hydraulic rolling type. When processing threads, the rolling die is installed on the rotating shafts of the 2-axis and the 3-axis machine, the extrusion thread is formed, and the rolling dies of different threads can be rolled into different sizes. It can process 3-angle threads, ladder-shaped patterns, straight patterns, mesh patterns, twill patterns, etc.

The advantages of the tooth roller are that the product is stable in size and high in accuracy, and the precision screws are mass-produced, and there are fixed and rolling types.

The fixed type can be equipped with a vibrating disc when the size allows, which is fully automated. The rolling type is suitable for processing workpieces with large lengths. The 3-axis machine is mainly designed for the processing of hollow pipe threads. It is specially designed for pipe parts. It is supported with equal 3 angles to determine the true roundness, high accuracy, concentricity and perpendicularity of the workpiece. It is a necessary choice for the fastener industry. 2 shaft machine debugging: 2 wheels need to be synchronized to adjust the corresponding center plates of the outer diameters between the two wheels. When processing the threads, the workpiece is placed on the center plate, and the center height of the workpiece is consistent with the center height of the rolling mold.

3-axis machine debugging: 3 roller dies adjust isosceles and 3 angles, adjust the gap according to the size of the tube, adjust the teeth distance, and install one end of the bytes outside when installing the roller die. Install it clockwise by A, B, and C. Take a circular tube and insert it between the 3 wheels, turn half a circle, take out the circular tube to check whether the pressure lines of the 3 wheels are connected to each other. If there is a gap, which wheel adjusts which wheel should be adjusted. 2 wheels and the other wheels are not debugged. The teeth adjustment needs to be squeezed multiple times according to the diameter of the pipe to adjust it to the ideal depth. Remember not to test the pressure at one time, as this will damage the machine.

Foshan Heling Machinery Equipment Co., Ltd. (hereinafter referred to as Heling Company) is a comprehensive industrial company integrating new product research and development, manufacturing and sales. Its main products include automatic cutting and scrubbers, high-speed scrubbers, and tooth rollers. Faced with the rapid development of technology in the 21st century, our company has been constantly innovating and pioneering, and has won the market with high-quality products, extensive marketing network and excellent after-sales service.