Heling Machinery explains how to adjust and operate the tooth rubbing machine?

Any machine will inevitably wear some parts during the production process, or there will be deviations after running for a long time. Take the tooth rubbing machine as an example. This requires adjustment of the machine before production. Therefore, Foshan Heling Machinery Equipment Co., Ltd. has many years of experience in producing tooth rubbing machines. Let’s take a look at the modification company.Teeth rubbing machineAdjustments may need to be made:

1. If the feeding time is adjusted in advance and delayed, the cam can be adjusted forward and backward. During the track adjustment process, ensure that the material can pass smoothly.

2. Place the screw material before pushing the material, press the inch movement to let the screw material turn half a circle, and use the screw material to check whether the tooth marks are aligned. If it is not adjusted, do not use the connecting rod to make large adjustments, and then lock them to prevent accidents.

3. When using newly grinded teeth, a gasket should be added to compensate for the wear thickness. (During the formal tooth rubbing process, reduce the bottom rolling pressure as much as possible, and adjust the gap between the teeth rubbing to just the right time to improve the service life of the machine.)

4. Adjust the tooth rubbing board, pay attention to the installation position of the long and short teeth and whether it is parallel to the height. Turn the flywheel by hand to see if the feeding time is correct. Note: When the power is turned off, if the length and short teeth are different in height, you need to use a gasket to raise it. This is especially true for high-speed wire rubbing machines.

The adjustment of the machine is to ensure and improve production accuracy, so the adjustment accuracy of some parts needs to be strictly required. In this way, the product's pass rate will be higher and it can effectively ensure the input-output ratio. You are trustworthy in Heling Machinery Tinder Rubber!
　　
Foshan Heling Machinery Equipment Co., Ltd. is a comprehensive industrial company integrating new product research and development, manufacturing and sales. It mainly engages in Guangdong tooth rollers and automatic cutting, high-speed, double-head screw fully automatic stamping, straightening and cutting, non-standard tooth rubbing equipment. Faced with the rapid development of technology, our company continues to innovate and dares to explore. With high-quality products, extensive marketing network and excellent after-sales service, our company has won the market with its goal of innovating, survival based on quality, integrity-based, and caring. We sincerely welcome new and old customers from all over the country and around the world to visit, jointly develop and create brilliance together!