It is necessary to understand the several functional characteristics of the wire rub machine and its correct operation method

Now that we are hereHeling, then you must not miss this article. Why do you say that? Because many people still don’t understand the several functional characteristics of the wire rubbing machine and its correct operation method, today Heling editor specially explained the two major elements of the wire rubbing machine to you. At the same time, let’s first understand the four major functions of the wire rubbing machine, namely interlocking control, parameter adjustment, fault alarm and fault query. Interlocking control: During the lubrication process of the wire rubbing machine, if the equipment where a certain lubrication point is located is stopped due to maintenance, the automatic lubrication system will stop lubrication of the lubrication point of the device. Parameter adjustment: The oil quantity, lubrication interval time and other parameters of each lubrication device can be modified through the text display. Wire rubbing machine fault alarm: The sound and light alarm can be output through the on-site sound and light alarm. Wire rubbing machine fault query: You can query through the text display.

So what is the correct operation method for the wire rubbing machine? Let Heling briefly analyze it below. First, before turning on the wire rubbing machine, we need to carefully check whether each part is correct and whether the 2 wire rubbing machine is balanced. All protective devices on the machine tool should be intact and should not be disassembled at will. Secondly, hand-pieces and wire rubbing machines are not allowed to be used during the operation of the wire rubbing machine. It is strictly forbidden to make adjustments when driving. Finally, before stopping the wire rubbing machine, the supply of blanks should be stopped first, and the power supply can be cut off when there is no blank in the wire rubbing machine room. If a temporary power outage and other faults are required, and if there is a blank in the wire rubbing machine room, it should be eliminated according to the prescribed method and no forced driving is allowed. The above are the two major elements of the wire rubbing machine.