Starting operation of multi-station cold heading machine

Cold heading machineThe types of fasteners made include bolts, double-headed bolts, screws, nuts and self-tapping screws. Bolts are fasteners that consist of 2 parts: head and screws (cylinders with external threads). They are used to fix and connect 2 parts with through holes.

The multi-station cold heading machine uses cold heading to actively forge various 6-corner nuts and taps them, which means making standard 6-corner nuts. The bar material is driven by the roller, feeds, feeds, cuts, presses, angles, punches, and several processes are completed in one machine. The cold heading station is placed horizontally, with accurate positioning, stable operation, and convenient repairs. It is suitable for equipment for manufacturers to mass-produce nuts.

Starting operation of multi-station cold heading machine:

1. Field hardware connection. Install a proximity switch on the device and connect each part of the component according to the circuit diagram.

2. Parameter setting. By setting the acceleration\/deceleration time parameters (2202) according to the requirements of the user unit, the time required for the inverter to increase the starting frequency from 1Hz to 50Hz (that is, the time required for the motor speed to increase from 0r\/min to 1500r\/min) to 3 seconds.

3. Processing test. If the device is started first and the parts are processed in manual mode, the device will operate normally and then switch to active mode. Set the total number of processing parts to 30 at the counter and then start the device. When the throughput reaches 30, the device will abort the work. In manual and active modes, the rolling speed control potentiometer will change the processing speed of the parts accordingly and display the speed of different moments on the digital display.

4. Emergency stop and persist. Press the urgent abort button on the control panel operation panel to abort the device. After disconnecting the main power, the counter data will not change. After restarting, the device continues to process parts until the preset quantity reaches, and then closes.

5. Reset. Reset the preset number and processing number separately according to the two reset switches on the counter control panel.

6. Key protection. For cold heading machines, after scrolling the key switch (SA1), all key operations on the counter operation panel will be disabled.