How to adjust the tooth plate of the tooth rubbing machine?

Teeth rubbing machineThe adjustment method of tooth plate is as follows:

1. Place the short tooth plate in the tooth plate seat groove and cover the tooth plate pressing block lock nut.

2. Place the long tooth plate in the middle tooth plate seat groove and install the tooth plate pressing block locking nut.

3. Check whether the 2-dental plates are parallel to the height.

4. Turn the flywheel with your hands to check whether the feeding time is correct.

5. Place the screw material before pushing the material, press the jog switch to rotate the screw material, and then reverse the screw material to remove the screw material.