​Specific use of the direct sales wire rub machine by the manufacturer

Teeth rubbing machineThe manufacturer's direct sales wire rubbing machine has special equipment for producing screws. Although there are many types of screws, the basic operating steps are the same. It has unique advantages and no other equipment. The wire rubbing machine not only saves time and energy, but also does not easily break teeth, so it will not be restricted. The machines of the wire rubbing machine factory are particularly suitable for all mechanical manufacturing industries. No matter what the industry uses wire rubbing machine, necessary matters must be paid attention to during use to prevent accidents.

Safety usage specifications for wire rub machine:

1. Before starting production, we must first thoroughly check each part to see if the two sides of the roll plate are balanced. After the test is completed, we can start normal production.

2. The equipment of all equipment above the machine tool should be intact and must not be disassembled.

3. During the operation of the reel, it is impossible to operate manually with the running components and the reel plate.

4. When the work is stopped due to sudden power outage or other reasons, the remaining blanks between the re-wire plates should be eliminated in accordance with relevant regulations and no forced operation shall be carried out.

5. Before the wire rolling machine stops working, the blank should be stopped first, and then the power should be turned off until there is no blank between the wire rolling plates.