Instructions for automatic cutting and tooth rubbing machine

aboutAutomatic cutting and rubbing machine, the spindle rotates and up and down, and the advance and retreat tools are equipped with a double safety clutch. The spindle can automatically stop and the reversing and retreating will not damage the tool. The internal threads on aluminum (Al) and aluminum (Al) alloys, copper (chemical formula Cu) can be added to emulsion. When the cutting part has been cut into the workpiece, it should be rotated 1\/4 times per 1-2 turns. The tapping machine is a component with through holes or blind holes on the end surface of the equipment, also known as flange flange disc or flange disc, which is on the inside of the hole. The mechanical processing equipment for processing internal threads and screws, and the automatic tapping machine is relatively automated as the name suggests. So what are its advantages over manual tapping machines? Compared with manual tapping machines, when working, the automatic tapping machine only needs to put the blanks into the hopper to automatically feed, automatically, automatically position, automatic tapping, and automatic unloading, and has high production efficiency. One worker can operate multiple equipment at the same time, saving labor costs. The fully automatic tapping machine can operate high-speed continuous circulation.

In-mold tapping machine, also known as in-mold tapping machine, is a equipment that cooperates with a 5-gold continuous mold to quickly process screw holes during stamping and processing of 5-gold parts. It is currently the advanced screw hole molding process for 5-gold parts, breaking the traditional processing method. Its core is to "integrate" and "tapping" technologies together to directly mold them in the mold.

What is important is the motor of the tapping machine. In fact, the chuck of the tapping machine is as important as the tapping machine motor. The tapping machine will slip when it hits the blind hole. If the torque chuck is not good, the chuck of the tapping machine will slip desperately when it encounters a material with high hardness. Or it will slip after 23 months. The torque of the tapping machine will not be enough to adjust the torque, and you have to buy a new chuck again. Therefore, spending more money to buy a better tapping machine is actually more cost-effective. As a machine that produces faster connections, tapping machines are considered to be a faster device. Currently, internal thread connections, screws, nuts, ring buckles, buckles, etc. are basically made using this processing equipment. It can be said that this device is helpful for current connections. At present, due to the continuous development of technology, this machine is also constantly improving, and many types of pneumatic tapping machines, electric tapping machines, hydraulic tapping machines, etc. have been born. Among them, pneumatic tapping machines are considered to be relatively representative.

Automatic cutting and rubbing machinePerformance Features:

1. Stamping speed range: SPM0-200 times\/min, fast production speed and high efficiency.

2. Tapping specification range: metric screw holes of M1M32, as well as customized various British, American and non-standard screw holes.

3. The tapping direction of the tapping machine: up and down, left and side inclined surfaces, depending on the product forming process.

4. Tapping machine installation: The whole machine is quickly plug-in, with accurate positioning and easy to disassemble.

5. Tape replacement: Use quick locking pin to lock, fast and stable installation, and replacement.

6. Tape safety protection function: When the punch is broken, the tap is retracted without punching, and the feeding stops.

7. Cooling of taps and tap parts: cooling of vaporized oil mist, uniform atomization and volatilization quickly ensure product cleaning, prevent taps from overheating, and prolong life.

Automatic cutting and rubbing machineInstructions for use can achieve automation, and one person can operate multiple equipment at the same time, which can significantly save labor costs! In addition, it also has the unique automation mechanism PLC programming control, integrated tap detection system, tap life management system, etc., Danone's high-efficiency tapping and intelligent control purpose. The tapping machine is a mechanical processing equipment that processes internal threads, screws or tooth buckles on the inner side of the holes of various parts with different specifications such as through-holes or blind holes such as the machine shell, equipment end surface, nut, flange flange disk or flange disk, and the automatic tapping machine and fully automatic tapping machine are more automated than manual tapping machine, which is also the choice of most customers at present. You need to understand the use environment of the automatic tapping machine, so as to make necessary protection measures (referring to solutions to problems). You need to understand the size and model of the tool handle, and facilitate the configuration of the clamping method. You need to understand the material of the object that needs to be processed. The hardness is because the hardness of the workpiece determines the processing ability of the tapping machine.