Adjustment of key working teeth plates of teeth rubbing machine

Teeth rubbing machineAdjustment of key working teeth
A good equipment must be coordinated with good operations to produce good products. The key task of the tooth rubbing machine - adjustment of teeth plates:

1. The specifications for the tooth plate conversion must be correct.

2. The top and bottom of the tooth plate must be parallel to the threads in order to make the threads even.

3. The height of the movable surface and the fixed surface of the tooth plate must be parallel and correct in order to make the tooth plate correct.

4. Do not overpressure (which may produce elliptical shapes and irregular shapes, or even tissue damage and fragmentation).

5. The two ends of the tooth plate must be chamfered to avoid damage to the tooth marks.

6. The advancement and retreat of the supporting plate must be at an appropriate distance.

7. The skateboard on the movable surface of the machine must be stable in order to make the teeth mark correct.

8. Gases with good parallel accuracy must be used.

9. When the screw threads are not evenly adjusted up and down, do not press them to avoid damaging the tissue.

10. During the transformation work, never lose oil to avoid affecting the life of the tooth plate.