Tips on maintenance of cold heading machines

Cold heading machineIt is a special equipment mainly used for mass production of fasteners such as nuts and bolts. Cold heading machines must be cleaned frequently. The cleaning methods can be wiped, lubrication and other methods, so that the performance and technical status of the equipment can be maintained. This is just a simple maintenance. The main maintenance is divided into 4 steps:

First, clean every corner of the multi-station cold heading machine, lubricate and adjust it after cleaning. This is the most basic thing: rack, gear box, and oil holes must be cleaned, and the surrounding debris must be cleaned.

2. Tools, accessories, these should be placed in the correct position, steam should be placed, and the lines should be organized!

3. Change the lubricating oil regularly and add cold heading processing oil. Do not cause the cold heading machine to break oil. The oil breakage will cause great damage to the machine: cold heading machine tips

4. Operate the cold heading machine in a safe situation, operate the cold heading machine according to the correct operating method. Do not overload, check regularly, find the root cause of the problem when encountering faults, and solve it in time. Do not wait until the machine is completely useless before remembering to repair it. Maintenance and maintenance can also improve the service life of the product.

Incorrect processing methods can cause the cold pier machine to fail. Yida Borun Petrochemical provides single vulcanization additives, composite agents and gold high cutting oil extreme pressure tapping oil, stamping stretching oil, cold heading forming oil stamping oil, etc. Below we introduce common faults and solutions to cold heading machines:

First, carefully check whether the fasteners of each of the units are locked before starting the machine.

Whether the Chengquan protection device is intact and must be checked frequently during work. It will loosen due to severe oil vibration, which will also cause failure.

2. After the equipment is adjusted, first turn the flywheel and check the

Is it working normally? After removing the wrench for the puller, start the motor to see if

Third, protective devices must be added to avoid accidents caused by rupture:

4↑False failure, multiple stations must be stopped immediately to find out the cause and eliminate hidden dangers

Maintaining a good maintenance system can not only effectively extend the equipment

Never use inferior cold heading forming oil for cheap to avoid unnecessary losses