Causes of common failures of multi-station cold heading machines

During use, multiple stationsCold heading machineThere will inevitably be faults, and faults should be eliminated in time to avoid affecting the normal operation of the machinery.

During work, if the slide crankshaft of the multi-station cold heading machine has heated up, it may be that the oil circuit is not smooth enough or has been blocked, and the relevant oil circuit should be cleaned. It may also be that the gap between the crank journal and the crankshaft is too small. At this time, the gap should be adjusted to a suitable state. Such a situation will occur if the surface is severely strained. At this time, corresponding measures should be taken to repair the strained surface.

If the start button is pressed and the transmission flywheel does not rotate, it may be that the machine is not powered on. Check whether its circuit is abnormal to ensure that the contact is good. It may also be that the tightness of the conveyor belt is not suitable and needs to be adjusted. If the flywheel is overloaded and a stuffy car is caused, check whether there are foreign objects stuck.

Other failures may occur in the multi-station cold heading machine. As long as it is analyzed and solved according to the specific situation, it can ensure that the machine continues to work normally.