How to debug tooth rolling machine?

Tooth Roller(Thread Rolling Machine) is used to roll threads during thread processing. If there are tooth messes, you can try the following debugging steps:

1. Check materials and tools: Make sure that the materials used meet the requirements and that the tools (rollers or drums) are not damaged or worn.

2. Adjust the pressure of the tooth roller: Check the pressure adjustment device of the tooth roller and adjust the pressure appropriately to ensure stability and consistency when rolling the thread. Excessive or low pressure may cause messy teeth.

3. Check the feed mechanism of the tooth roller: Make sure the feed mechanism of the tooth roller works normally and provide appropriate feeding speed and force. If the feeding speed is too fast or the force is uneven, it may cause messy teeth.

4. Check the centering of the roller or roller: Make sure the axis of the roller or roller is centered with the workpiece. If the centering is inaccurate, it may cause irregular threads or messy teeth.

5. Check the lubrication system: Ensure that the lubrication system of the tooth roller works normally and provide an appropriate amount of lubricant. Inadequate lubrication may lead to increased friction and affect the quality of the thread.

If the above methods cannot solve the problem of messy teeth, it is recommended to consult the manufacturer or technical support team of the tooth roller for more specific commissioning guidance or repair services. They can provide professional advice and support based on the specific circumstances.